Operating Method:

A. Open the package, take out the cleaner and place it steadily. Take out the nozzle, install to the machine.
B. Plug in the power socket after confirming that the voltage of the cleaner is the same as the power voltage.
C. Connect the pedal switch and turn on the main power switch on the machine back.
D. Open the safety valve, add 1L pure clear water with beaker and funnel, when the full water alarm and full water red lamp lights up,
stop to add water, then close the safety valve.
E. Turn on the front heating switch, then the switch indicator light is on.
F. In about 6 minutes, the green indicator lamp lights up, indicating that the cleaner pressure reaches.
G. Aim the cleaned article to the nozzle, slightly stepping on the pedal switch, then the cleaning starts.
H. When the cleaning finishes, take the cleaned article away, the cleaner will keep the standby mode for the cleaning next time.
I. After work, turn off the heating switch and cut off the power supply.
J. Before turning on the cleaner next time, open the safety valve, lift the handles of the cleaner, pour the liquid out of the boiler and
add 1L pure water again to full water condition.