Complete Model Lineup & Technical Specifications
| Model Code | Product Name & Dimensions | Primary Forming Function & Bench Application |
| GH-1 | Michael Good Stake Holder |
Dedicated holder for the Fretz Michael Good G-series stake line; features a tapered tang for clamping in a bench vise and a top locking screw (with hex wrench) to secure stakes rigidly. |
| G-1 | 16 mm / 120° Hook Stake |
Open-angle 16 mm single-curve hook stake designed as the primary starting stake for establishing initial anticlastic curves without binding. |
| G-2 | 16 mm / 90° Hook Stake |
Steeper 90° curve at 16 mm width to deepen anticlastic forms cleanly without metal binding; used individually or as Stage 2 after the G-1. |
| G-3 | 12 mm / 90° Hook Stake |
Scaled down to 12 mm at a 90° hook angle for smaller-scale anticlastic work or as a progressive Stage 3 stake to begin closing larger forms. |
| G-4 | 8 mm / 90° Hook Stake |
Compact 8 mm / 90° hook stake built for small-scale anticlastic forming and progressively tightening deeper organic curves without binding. |
| G-5 | 6 mm / 90° Hook Stake |
Fine 6 mm / 90° hook stake for narrow anticlastic channels, slender cuffs, and tighter progressive closing of sculptural hollow forms. |
| G-6 | 4 mm / 90° Hook Stake |
Ultra-fine 4 mm / 90° hook stake for micro-scale anticlastic raising and finishing tight, closed organic contours cleanly. |
Form fluid, sculptural anticlastic curves, hollow cuffs, and organic tubular shapes without metal binding using the authentic Fretz® Michael Good Stakes (G-1 through G-6) and GH-1 Vise Holder. Developed in direct collaboration between master toolmaker Bill Fretz and renowned goldsmith Michael Good—pioneer of modern anticlastic raising—each stake features a specialized single-curve hook geometry that allows sheet metal to move freely over the working face without trapping or binding on the anvil.
Machined from hardened 420-grade stainless steel with high-polish working areas, the G-1 through G-6 hook stakes shape ductile precious and non-ferrous metals—including gold, silver, platinum, copper, and brass—without scratching or leaving unwanted tool marks. Each stake (G-1 to G-6) and the GH-1 Vise Holder are available in flexible mixed-model wholesale quantities—with no mandatory full-set bundle requirement—.
Key Features & Benefits
-
Flexible Single-Piece & Complete-Set Ordering: Purchase individual hook stakes (G-1 through G-6) or the GH-1 holder separately to match specific project scales or restock high-demand SKUs, or order the complete 7-piece set (G-1 to G-6 + GH-1) for full progressive coverage.
-
Non-Binding Single-Curve Anticlastic Geometry: Engineered by Bill Fretz and Michael Good with an open single-curve hook profile so complex saddle-shaped and tubular anticlastic forms never lock or bind onto the stake during raising.
-
Progressive 6-Stage Sizing System (16 mm down to 4 mm): Progresses systematically from the open 16 mm / 120° G-1 starter stake through the tighter 90° G-2 (16 mm), G-3 (12 mm), G-4 (8 mm), G-5 (6 mm), and G-6 (4 mm) hook stakes to deepen and close organic forms.
-
Hardened 420-Grade Stainless Steel with High-Polish Working Areas: High-hardness, corrosion-resistant stainless steel resists denting under repeated raising hammer blows while protecting soft precious metals from scratches or carbon steel contamination.
-
Dedicated GH-1 Vise-Mounted Stake Holder: Features a tapered tang that clamps securely in a bench vise and a top locking screw (with included hex key) that holds any G-series stake firmly in place for two-handed forming.
Primary Application Sectors
-
Anticlastic Cuff, Bangle, Ring & Earring Raising
-
Sculptural Hollow Form & Organic Ribbon Jewelry Fabrication
-
Fine Goldsmithing, Silversmithing & Chasing/Planishing Work
-
Commercial Jewelry Manufacturing Workshops & Metalsmithing Academies
Commercial Procurement & B2B Wholesale Supply
Whether outfitting commercial goldsmithing benches, metalsmithing training studios, or expanding your professional jewelry tooling catalog, we supply authentic Fretz® Michael Good Stakes (G-1 through G-6) and GH-1 Vise Holders individually by single piece, in flexible mixed-model quantities, or as complete 7-piece sets. Benefit from tiered volume wholesale pricing, consolidated export packaging, and reliable inventory fulfillment. Click Get a Quote to connect with our B2B commercial sales desk for customized wholesale quotes and supply terms.





