|
Round Drawplate 0.26 – 4.10mm
|
||||
|
Precision made from quality hardened steel, this Drawplate has 52 holes ranging from 4.10mm down to 0.26mm. This tool is essential for reducing and reshaping wire material using a Drawbench or by securing the plate in a vice.
Full range of hole sizes as follows 0.26mm, 0.28mm, 0.30mm, 0.325mm, 0.35mm, 0.375mm, 0.40mm, 0.425mm, 0.45mm, 0.475mm, 0.50mm,0.525mm, 0.55mm, 0.575mm, 0.60mm, 0.65mm, 0.70mm, 0.75mm, 0.80mm, 0.85mm, 0.90mm, 1.00mm, 1.10mm, 1.20mm, 1.30mm, 1.40mm, 1.50mm, 1.60mm, 1.70mm.1.80mm, 1.90mm, 2.00mm, 2.10mm, 2.20mm, 2.30mm, 2.40mm, 2.50mm, 2.60mm, 2.70mm, 2.80mm, 2.90mm, 4.00mm, 4.10mm
* We provide different quality options for this drawplate
|
||||
|
Material
|
Tungsten Carbide
|
|||
|
Size
|
||||
|
DPFF00055- Delux
|
Thickness: 7mm, L* W: 207mm x 55mm
|
|||
|
DPFF0006- Fine
|
Thickness: 8mm, L* W: 205mm x 56mm
|
|||
|
DPFF0007- Economic
|
Thickness: 5mm, L* W: 205mm x 55mm
|
|||
Menu
