Complete Model Lineup & Technical Specifications
1. 14 mm Diameter Miniature Mushroom Stakes (M-1, M-2, M-3)
| Model Code | Stake Name & Diameter | Primary Forming Function & Bench Application |
| M-1 | Mushroom Flat Stake (14 mm) |
14 mm flat-top mushroom stake ideal for flattening curves in jewelry metal and achieving nearly right angles using the stake’s edge. |
| M-2 | Mushroom Low Dome Stake (14 mm) |
14 mm low-dome mushroom stake designed to create gentle curves and soft angles in jewelry metals. |
| M-3 | Mushroom High Dome Stake (14 mm) |
14 mm high-dome mushroom stake built for hammering out dramatic curves and pronounced domed forms. |
2. 10 mm Diameter Miniature Mushroom Stakes (M-4, M-5, M-6)
| Model Code | Stake Name & Diameter | Primary Forming Function & Bench Application |
| M-4 | Mushroom Flat Stake (10 mm) |
Compact 10 mm flat-top mushroom stake ideal for flattening tight areas and using its rolled edges to form soft right angles in jewelry metal. |
| M-5 | Mushroom Low Dome Stake (10 mm) |
Compact 10 mm low-dome mushroom stake designed for creating subtle curves and soft angles in smaller jewelry components. |
| M-6 | Mushroom High Dome Stake (10 mm) |
Compact 10 mm high-dome mushroom stake ideal for hammering out dramatic curved shapes in small-scale jewelry metal. |
3. 18 mm Diameter Miniature Mushroom Stakes (M-7, M-8, M-9)
| Model Code | Stake Name & Diameter | Primary Forming Function & Bench Application |
| M-7 | Mushroom Flat Stake (18 mm) |
Wide 18 mm flat-top mushroom stake ideal for broad flattening and forming tight right angles in jewelry metal. |
| M-8 | Mushroom Low Dome Stake (18 mm) |
Wide 18 mm low-dome mushroom stake with rolled edges, built for creating subtle curves and soft angles across broader surfaces. |
| M-9 | Mushroom High Dome Stake (18 mm) |
Wide 18 mm high-dome mushroom stake ideal for hammering out bold, dramatic curved shapes in jewelry metal. |
Flatten curves, crisp up right angles, and raise subtle to dramatic domes in precious and non-ferrous jewelry metals with the authentic Fretz® Miniature Mushroom Stakes (Models M-1 through M-9). Engineered for goldsmiths, silversmiths, and fine metalsmithing artisans, this 9-model miniature mushroom anvil system pairs three head diameters (10 mm, 14 mm, and 18 mm) with three distinct top crown profiles (Flat, Low Dome, and High Dome) to deliver exact internal anvil support across hollow forms, bezels, rings, and sheet components.
Machined from hardened 420-grade stainless steel with high-polish working areas, each M-series stake shapes gold, silver, platinum, copper, and brass without leaving accidental tool marks or carbon steel transfer on your workpiece. Designed for rigid bench stability in the Fretz® H-1 and VH-1 Stake Holders (stake holders sold separately), every model from M-1 through M-9 is available for individual single-piece purchase or flexible mix-and-match B2B wholesale ordering—with no mandatory full-set bundle requirement.
Key Features & Benefits
-
Sold Individually or by Flexible Model Selection (No Full-Set Bundle Required): Source exact individual stake models (e.g., M-1, M-4, M-7, or M-9) to outfit specific bench tasks, replace single tools, or stock high-turnover SKUs without committing to bundled sets.
-
Complete 3 × 3 Size & Profile Matrix (10 mm, 14 mm, and 18 mm):
-
Flat Mushroom Stakes (M-4, M-1, M-7): Ideal for flattening curves and forming crisp or soft right angles along the stake’s perimeter edge.
-
Low Dome Mushroom Stakes (M-5, M-2, M-8): Gently crowned tops with rolled edges engineered for creating subtle curves and soft angles in jewelry metal.
-
High Dome Mushroom Stakes (M-6, M-3, M-9): Deep spherical crowns built for hammering out dramatic curved shapes and pronounced hollow domes.
-
-
Hardened 420-Grade Stainless Steel Construction: High-hardness, corrosion-resistant stainless steel resists surface denting under repeated planishing and raising blows while preventing carbon steel contamination.
-
High-Polish Working Areas: Mirror-polished mushroom heads protect soft precious metals from accidental scratches and marring, minimizing post-forming buffing.
-
Compatible with Fretz® H-1 & VH-1 Stake Holders: Tapered square tangs lock securely into Fretz H-1 bench holders or VH-1 vise holders (sold separately) for stable, two-handed forming.
Primary Application Sectors
-
Hollow Dome Raising, Cupping & Interior Planishing
-
Sheet Metal Flattening & Precision Right-Angle Edge Forming
-
Fine Goldsmithing, Silversmithing & Bezel/Pendant Fabrication
-
Commercial Jewelry Manufacturing Workshops & Metalsmithing Academies
Commercial Procurement & B2B Wholesale Supply
Whether outfitting commercial goldsmithing benches, metalsmithing training studios, or expanding your professional jewelry tooling catalog, we supply authentic Fretz® Miniature Mushroom Stakes (M-1 through M-9) individually by single piece or in flexible mixed-model wholesale quantities—no full-set bundling required. Benefit from tiered volume pricing, consolidated export packaging, and reliable inventory fulfillment. Click Get a Quote to connect with our B2B commercial sales desk for customized wholesale quotes and supply terms.








