Complete Model Lineup & Technical Specifications
| Model Code | Stake Name & Geometry | Primary Forming Function & Bench Application |
| F-1 | Beak Stake |
Classic jeweler-scale silversmithing stake featuring two slightly tapered ends for progressive raising and shaping under repeated hammer blows. |
| F-2 | Double Convex Stake |
Dual convex ends—one large for dramatic curves and one small for doming sheet metal—ideal for forming domed bracelets, rings, and hollow beads from tubular blanks. |
| F-3 | Doming Stake |
Features two concave ends and a slightly rounded top crown for shaping rings, bezels, and small domed jewelry components. |
| F-4 | Cone Stake |
Dual tapering conical ends (one large, one small) for forming graduated cones, paired with a wide contoured middle saddle for shaping concave curves in sheet metal. |
| F-5 | Hoop Doming Stake |
Engineered for hoops, earrings, and rings; features two ends with flat working faces built specifically for forming tight, crisp curves. |
| F-6 | Shell Stake |
Versatile multi-contour stake for bracelet-sized shell forms, bold concave channels, and narrow convex curves to build dynamic anticlastic jewelry forms. |
| F-7 | Thin Shell Stake |
Narrower profile than the F-6, tailored for forming tight convex and concave curves to produce delicate, small-scale anticlastic shapes. |
| F-8 | Horn Stake |
Jeweler-scale classic horn anvil designed for hammering out hollow domed forms—such as hollow beads from tubing, domed cuffs, and hollow rings—from sheet metal. |
| F-9 | Convex / Concave Stake |
Dual-purpose stake for synclastic and anticlastic work, from shallow domes on the convex side to bracelet-sized concave curves and S-shaped sculptures on the reverse. |
| F-2A | Convex Fluting Stake (Lining) |
Stage 1 fluting stake used to establish initial concave flutes along marked lines using straight or curved rolled-edge hammers to sink surrounding metal and raise crisp ridges. |
| F-2B | Convex Fluting Stake (Sharp) |
Stage 2 fluting stake used after F-2A layout to deepen and refine the geometry of pre-formed concave flutes. |
| F-2C | Convex Fluting Stake (Extreme Sharp) |
Stage 3 finishing fluting stake used after F-2B to sharpen high ridge points and complete crisp, high-definition fluted metalwork. |
Shape precision jewelry curves, hollow rings, domed cuffs, and crisp decorative flutes with the authentic Fretz® F-Series Miniature Forming Stakes (Models F-1 through F-9 and F-2A through F-2C). Scaled down from classic silversmithing anvils specifically for goldsmiths, diamond setters, and fine metalsmithing artisans, each stake is machined from hardened 420-grade stainless steel with mirror-polished working surfaces to shape ductile precious and non-ferrous metals—including gold, silver, platinum, copper, and brass—without scratching or marring the workpiece.
Designed for rigid, hands-free bench stability in the Fretz® H-1 or VH-1 Stake Holders (stake holders sold separately), the F-Series spans 12 specialized geometries covering doming, raising, cone forming, synclastic/anticlastic shell shaping, and progressive three-stage concave fluting. Every model in the F-Series is available for individual single-piece purchase or flexible mix-and-match B2B wholesale ordering—with no mandatory full-set bundle requirement.
Key Features & Benefits
-
Sold Individually or by Flexible Model Selection (No Full-Set Bundle Required): Source exact individual stake models (e.g., F-1 through F-9, F-2A, F-2B, or F-2C) to replace single bench tools, fulfill custom workshop orders, or stock high-turnover SKUs without purchasing complete sets.
-
12 Specialized Miniature Silversmithing Profiles: Covers the full spectrum of fine jewelry forming—from beak, horn, dome, and cone stakes to anticlastic shell stakes and the progressive F-2A / F-2B / F-2C convex fluting system.
-
Hardened 420-Grade Stainless Steel Construction: High-hardness, corrosion-resistant stainless steel resists surface denting under repeated chasing and planishing blows while preventing carbon steel transfer onto precious metals.
-
Highly Polished Working Surfaces: Mirror-polished forming zones protect soft gold, silver, and platinum from scratches and tool marks, minimizing post-forming filing and buffing.
-
Rigid Compatibility with Fretz® H-1 & VH-1 Holders: Standardized tapered tangs seat securely into Fretz H-1 horizontal bench holders or VH-1 vise-mounted holders (sold separately) for stable, two-handed control.
Primary Application Sectors
-
Fine Goldsmithing, Silversmithing & Hollow Ring/Bead Fabrication
-
Anticlastic Cuff, Bangle & Sculptural Sheet Metal Forming
-
Progressive Concave Fluting & Chasing/Planishing Work
-
Commercial Jewelry Manufacturing Workshops & Metalsmithing Academies
Commercial Procurement & B2B Wholesale Supply
Whether outfitting commercial goldsmithing benches, metalsmithing training studios, or expanding your professional jewelry tooling catalog, we supply authentic Fretz® F-Series Miniature Forming Stakes (F-1 through F-2C) individually by single piece or in flexible mixed-model wholesale quantities—no full-set bundling required. Benefit from tiered volume pricing, consolidated export packaging, and reliable inventory fulfillment. Click Get a Quote to connect with our B2B commercial sales desk for customized wholesale quotes and supply terms.







